J-Pins 6mm Diameter – 25pk
Delivery only £10 per order to most UK areas
Shop now, pay later.
Strong Fixings For Securing A Range Of Products
Made from galvanised steel and measuring 6mm in diameter, 50mm in width and 285mm in length, our pack of 25 J-Pins are the ideal anchoring tool when installing GrassMesh, X-Grid, Mats, TurfMesh, Membrane and more on hard or uneven ground where U-Pins cannot be used.
- Dimensions: 285mm x 6mm
- Pack size: 25 pins
- For use with: TurfMesh, X-Grid, Rubber grass mats & more
£19.00
In stock
In stock
Click here to ask a question
What are J-Pins used for?
J-Pins are used to secure TurfMesh, GrassMesh, X-Grid, Membranes and more.
Why should I use J-Pins?
J-Pins are typically used on hard or uneven ground where U-Pins may not be suitable.
Where can I find the installation instructions?
Instructions can be found on the downloads tab at the bottom of the product page. In addition, more information on installation can be found through our blogs and YouTube videos.
How much is delivery?
Delivery is £10 for any quantity of X-Grid, bases, mats, tiles and accessories.
How quick is shipping?
We typically endeavour your product to be delivered within 3-5 working days but the expected delivery time of your purchase will be displayed clearly at checkout.
How are the products packaged?
We take great care when packaging your order to ensure that our products reach you in the best possible condition. In addition, we are always trying to be more sustainably friendly therefore try to minimize the amount of plastic packaging we use around our products and use recycled packaging.
What do I Use J-Pins For?
Our J-pins are manufactured from 6mm diameter galvanised steel and used as an alternative fixing solution for u-pins when securing membranes, mats, grids, grass reinforcement meshes and grass protection meshes into uneven or hard ground where you may not be able to fully install a u-pin. With one side of the j-pin staple being 285mm long and the other side much shorter, it is easier to push this pin into tougher ground to secure your products.
Installations using j-pins is quick and simple; simply lay out your selected membrane, mesh or other product in the correct area and insert the j-pins into the ground at approximately 1m intervals. Ensure that the pin sits flush with the surrounding ground so there is no chance of tripping or falling over the pin. If the ground is hard and it is difficult to push the pin into the ground using your hands then use a rubber or wooden mallet to hammer each j-pin into the ground.
If you require more information on our range of J-pins or would like some advice on which type of pin or peg would be suitable your project, please do not hesitate to get in touch today. Leave us a message or live chat to a member of our staff now.
| Weight | 1 kg |
|---|---|
| Dimensions | 50 × 6 × 285 mm |
| Pack Size | |
| Suitable for |